Lollipop Christmas Ornaments

You would not believe how fast these go together. You can make them for everyone you know or attach them to Christmas gifts. They could be great sellers for your Etsy shop or markets.

Supplies needed for one lollipop:

7 x 7 inch piece of fabric

6" lollipop sticks

3 3/4" x 6" clear treat bags

14" pieces of ribbon (red, green, or white)

1/2  to 1" button

2 1/2” circle cut from card stock (any heavier paper)

Craft glue or a hot glue gun

Heavy or metallic thread for hanger

Sewing thread

Misc items: needles, scissors, pencil, ruler

Instructions:

1. Iron your fabric, then cut a 6 1/4" circle from the fabric, and 2 1/2” circle card stock. You can make a pattern of these circle sizes or you can raid your kitchen cabinets and find a bowl or lid that will be the dimensions for you to trace around. I used a small bowl. Be sure to draw your tracings on the wrong side of the fabric.

2. Thread your needle with enough thread to go around your circle and make a knot. If you are using all purpose thread you will want to double it so it will have more strength when you gather. If you are using a heavy thread such as a button or craft thread, you won't need to double. Be sure to watch for knots as you stitch. Turn the outer edge of your fabric circle about 1/4" to the wrong side. Begin stitching and turning the edge under as you go. Make your stitches at least 1/4" long and that same distance apart. I found that if your stitches are too close together, your hole in the center will be too big. Stitch all the way around your circle. When you get to the end, begin gathering up your stitching. Slip your 2 1/2" card stock circle inside, then continue gathering until you have closed the "yo-yo." Be gentle so you don't break your thread. You will have a tiny hole in the center. Tie off and clip threads.

3. Make a tiny 1/4" slit in the bottom of your yo-yo. I like to make mine so that the stripes on the back will be up and down when hanging. Drop a dab of glue in the center of your yo-yo and onto the card stock beneath. Slip your lollipop stick up through the little slit you just made until it reaches the glue, let dry. Run some glue along the gathered edge of the hole and place the button on top of that. This is the part where I (accidentally) hot glued a button onto my thumb. I would not recommend doing this. It hurts.

4. Slip the clear treat bag over your lollipop and tie in place with a piece of ribbon. Make a bow and then trim the tails at an angle. I did cut about 3/4 inch from the open end because it was a bit too long.

5. Cut about 10" of heavy or metallic thread. Thread a large eyed needle. Bring the needle through along the upper edge of the lollipop (about 1/2" wide stitch). Be sure to go through the fabric and the plastic because the plastic will not be strong enough to hold the ornament and will eventually break. Tie a knot in the string so that you have about a 3" hole to use for hanging. Trim excess thread close to knot.

Would you like to see more tutorials, sewing tips and articles?

Be sure to sign up for the newsletter. I promise I won't spam you or share your email address.

Sign up for Sher's Creative News